Pontiac tempest 1968 Service Manual page 638

CHASSIS E L E C T R I C A L SERVICE 12-17
o o o o o o
V - 8 E N G I N E
FRONT OF CAR
V I E W A
o o o o o o
t = ^ L _ _ ^ F R O N T OF CAR
TYPICAL C A B L E
I N S T A L L A T I O N
V I E W B
6 CYL. W I T H STD. BATTERY
B
6 CYL. W I T H H E A V Y DUTY BATTERY
CAUTION: The retaining screws are part of the
grounding circuit and must be installed to provide
proper connections for the printed circuit
F i g . 1 2 - 1 0 Tempest—Battery Cable Routing
FUEL GAUGE-TEMPEST OR FIREBIRD
1. Remove instrument cluster.
FUEL GAUGE-PONTIAC
1. Remove two screws that retain gauge to cluster.
2. Remove screws that retain circuit board to
cluster.
3. Remove gauge.
4. To replace, reverse above procedure.
2. Remove cluster lamps from gauge cover plate,
ground screw and terminal nuts attaching printed
circuit to fuel gauge.
3. Remove three screws retaining gauge to cluster
housing.
4. Carefully move printed circuit away from gauge
and remove gauge from cluster housing.