H E A T I N G A N D V E N T I L A T I O N
1-11
BLOWER DUCT
Fig. 1-10
Heater Blower and A i r Inlet
HEATER HOSE INLET AND OUTLET
REMOVE AND REPLACE—ALL MODELS
(Figs. 1-7, 1-8 and 1-9)
DEFROSTER DUCT—REMOVE AND REPLACE
PONTIAC
1. Disconnect battery.
2. Remove radio.
3. Remove IP pad.
4. Remove glove compartment box.
5. Remove screws
retaining duct to dash and
heater case.
6. Remove duct.
7. Check for air flow leaks.
8. Replace by reversing removal procedure.
TEMPEST
1. Disconnect battery.
2. Remove glove compartment.
3. Remove radio.
4. Remove screw retaining duct to heater case.
5. Bend four tabs retaining upper portion of duct.
6. Remove duct.
7. Replace by reversing above procedure.
F i g . 1 -11
Defroster Duct Installation—Firebird