Pontiac tempest 1968 Service Manual page 644

CHASSIS E L E C T R I C A L SERVICE
12-23
TO R.H. DOOR JAMB SWITCH
i C L O C K POWER LEAD
, A C S R Y . LEAD
-RHEDSTAT LEAD
DIR. SIGNAL
C O N N E C T O R
B/U LAMP
N
SWITCH
D O W N SHIF
SWITCH
NEUT. SAFETY
SWITCH
L.H. D O O R JAMB
SWITCH
POWER ACSRY. FEED
PARKING BRAKE SWITCH
Fig. 12-17 Instrument Panel Wiring—Tempest
6. Tempest models - Remove retainer securing
right wiper transmission to linkage which attaches to
wiper motor crank.
7. Remove wiper transmission and linkage.
NOTE: Windshield wiper linkage components are
to be serviced. Check master parts catalog for
correct service packages. Service packages will
include installation instructions.
8. To install, reverse above procedure. Make sure
wiper blades are in park position after they are
installed.
ARM AND BLADE ADJUSTMENT
Pontiac Models (Fig. 12-29)
1. With motor in park position, and wiper switch
off, place drag link of left arm and blade assembly on
pin. With arm end in position as shown in view C ,
push head of arm on transmission shaft.
2. Place drag link of right arm and blade assem­
bly on pin. Lock retainer on pin with blade pivot
head in position shown in view B and push head of
arm on transmission shaft.
3. Locate blade ends on stop in position shown in