8-14
1968 P O N T I A C SERVICE MANUAL
NUTS
VIEW A
NUTS
17 lb. ft.
SCREW 90 lb. in.
VIEW E
VIEW C
Fig. 8 - 1 6
Pontiac Dual Exhaust System Except 4 2 8 -
376 Engine
5. Move
exhaust
pipe, muffler a n d tail pipe
rearwards.
6. Disconnect crossover pipe from exhaust pipe
and remove crossover pipe assembly.
7. Install crossover pipe by reversing above pro
cedure. Tighten one (1) bolt finger tight with parts
seated before tightening other bolt.
NOTE:
No gaskets are used between
crossover
pipe and manifolds.
Tighten crossover
pipe to
manifold bolts 30 lb. ft. torque.
Tighten exhaust
pipe to crossover
pipe clamp bolts to 30 lb. ft.
torque.