V-8
E N G I N E
6 - 7 3
M A I N B E A R I N G
CAP DOWELS
OIL SEAL
OIL SLINGER
GROOVE
OIL
DRAIN G R O O V E
PASSAGE
F R O M PUMP
T O
FILTER
WATER
JACKET
PLUGS
f t -
WATER
JACKET
PLUGS
BULKHEAD
PASSAGE TO RIGHT
OIL GALLERY
/ / .
PASSAGE FROM /
LEFT OIL
GALLERY
Fig. 6-129 Cylinder Block—View From Bottom
24. Invert engine and remove oil pan and flywheel
front cover.
25. Remove oil pump assembly and drive shaft.
26. Remove baffle and oil indicator tube extension.
27. Remove crankshaft.
28. Remove all connecting rod and piston assem
blies.
29. Remove connecting
rods from pistons
and
identify for installation in original location.
30. Remove old block from stand and mount new
fitted block on stand.
31. Remove each piston and pin assembly from
new block and identify for installation in original
position.
This completes disassembly for fitted block re
placement.
Proceed with assembly operations.
Use