Configuring Basic Gatekeeper Settings - Avaya Scopia XT Series User Manual

2. Enter the following values:
3. To configure your gatekeeper's settings, select Next and continue with
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
Table 3: Configuring the IP address
Field Name
IP Address Mode or Determines if the IP address is dynamically allocated (using
Automatic IP DHCP), or if you manually designate a static IP address. You must
Address use only static addresses for:
IP address Enter the system static IP address. For dynamic IP addresses, this
field displays the current IP address.
Subnet mask Enter the subnet mask associated with the IP address. For dynamic
IP addresses, this field displays the current subnet mask.
Gateway (IP Enter the default gateway static IP address. The gateway is used to
Address) route information between two subnets, for example, between the
headquarters and a partner site. For dynamic IP addresses, this
field displays the current gateway IP address.
DNS (Server IP Enter the DNS server IP address. The DNS server translates
Address) domain names into IP addresses. For dynamic IP addresses, this
field displays the assigned DNS server IP address.
Gatekeeper Settings on page 19.
If you are not using a gatekeeper in your deployment, select Next > Done.
Figure 13: Defining IP Settings
Description
• Scopia ®
XT Telepresence deployments
• Units on a public network
• SIP deployments where the unit is secured with a TLS
certificate.
Configuring Basic
Getting Started | 19