Chapter 3: Configuring The Xt Telepresence; Controlling The Xt Series - Avaya Scopia XT Telepresence Deployment Manual

Chapter 3: Configuring the XT
This chapter guides you through the XT Telepresence configuration and covers these topics:
Related links

Controlling the XT Series

Activating the XT Series and its Optional Features
Configuring Basic Settings with the Quick Setup Wizard
®
Setting Up Scopia
Downloading and Installing the XT Telepresence Calibration Application
Calibrating your XT Telepresence
Adding XT Telepresence in Equinox Management
Preparing for your Telepresence Meeting
Controlling the XT Series
There are a number of ways to interact with the Avaya Scopia
Important:
Once the telepresence system is configured, only use the Scopia
the system. The XT Remote Control Unit can only switch the system on or off.
• Use the XT Remote Control Unit locally on the endpoint itself to navigate the menus (GUI) and
perform user functions and advanced configuration. You view the results on a connected
monitor.
• (XT Executive only) Use a keyboard and mouse of a computer connected to the endpoint to
navigate its menus instead of the XT Remote Control Unit. This also requires a connected
monitor.
• Use the Scopia
via an intuitive touch interface. This app is limited to user features, and does not extend to
administration or advanced configuration. For more information, see User Guide for Scopia
Control.
January 2017
Telepresence
on page 34
Control on page 64
on page 70
on page 82
®
Control app for iOS devices to control user-level functionality of the XT Series
Avaya Scopia
Comments on this document? infodev@avaya.com
on page 43
on page 51
on page 79
®
XT Series:
®
XT Telepresence Deployment Guide
on page 68
®
Control iPad app to control
®
34