Ricoh D146 Service Manual page 1615

List of Error Messages
Error Message
[file name: XX] error,No
space
left on device
pasePut() - error : The
destination directory cannot
be
made.
pasePut() - error : fileCopy
Error.
Put Error!
[file name: XX] error,No
space
left on device
paseCopy() - error : The
destination directory cannot
be
made.
paseCopy() - error : fileCopy
Error.
Copy Error!
Put Error! *1
Copy Error! *1
Delete Error!
[XXXXX] is an unsupported
command.
Version Error
D146/D147/D148/D149/D150
Cause
Writing destination is full.
(The NAND flash memory
on the controller board is
full.)
Writing destination is full.
(The NAND flash memory
on the controller board is
full.)
Error, not normally expected
to occur
6-4
Remedy
Uninstall the unnecessary
SDK applications.
If you can not uninstall it,
implement escalation,
stating the "model name,
application configuration,
SMC sheet
(SP5-990-006/024/025),
and error file."
Uninstall the unnecessary
SDK applications.
If you can not uninstall it,
implement escalation
stating the "model name,
application configuration,
SMC sheet
(SP5-990-006/024/025),
and error file."
If you cannot uninstall it,
implement escalation
stating the "model name,
application configuration,
SMC sheet
(SP5-990-006/024/025),
and error file."
*1
Without the foregoing error
message, only "Put Error /
Copy Error" will be
displayed
System Maintenance Section