Ricoh D146 Service Manual page 1553

Input Check Table
Shift Tray: Set Detection
System
084
Detects that shift tray is set to main unit.
(01: set, 11:not set)
Shift Tray: Position Sensor 1
085
Detects shift tray position.
(0: Stop on this side. during moving towards inner,
1: Stop on inner side. during moving towards this side)
Shift Tray: Position Sensor 2
086
*It its a backup sensor with this machine, so "1" is always displayed)
SI Bypass SF Paper Contact
Sensor: Front
087
Detects side fence position of one action bypass in analog value, and displays
sensor output value.
SI Bypass SF Paper Contact
Sensor: Rear
088
Detects side fence position of one action bypass in analog value, and displays
sensor output value.
SI Bypass SF Position Sensor
089
Displays output value for side fence position sensor of one action bypass.
PCU Lubricant End Sensor:Y
090
Not available with C1
PCU Lubricant End Sensor:M
091
Not available with C1
D146/D147/D148/D149/D150
[0 or 1 / 0 / 1/step]
ENG 01: set
11:not set
[0 or 1 / 0 / 1/step]
0: Stop on this side. during
ENG moving towards inner
1: Stop on inner side. during
moving towards this side
ENG [0 or 1 / 0 / 1/step]
ENG [0.000 to 3.300 / 0.000 / 0.001V]
ENG [0.000 to 3.300 / 0.000 / 0.001V]
ENG [88 to 325 / 88 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
3-14 System Maintenance Section