Ricoh D146 Service Manual page 1525

Printer SP Mode
1001 [Bit Switch]
010 Bit Switch A
bit 0 DFU
bit 1 DFU
bit 2 DFU
bit 3 DFU
bit 4 DFU
bit 5 Store and Skip Errored Job locks the
queue
If this is 1, then after a job is stored using Store and Skip Errored Job
(SSEJ), new jobs cannot be added to the queue until the stored job has
been completely printed.
bit 6 Allow use of Store and Skip Errored Job if
connected to an external charge device.
If this is 0, Store and Skip Errored Job (SSEJ) will be automatically
disabled if an external charge device is connected.
Note: We do not officially support enabling this bitsw (1). Use it at your
own risk.
bit 7 Job cancels remaining pages when the
paid-for pages have been printed on an
external charge device
When setting 1 is enabled, after printing the paid-for pages on an external
charge device, the job that includes any remaining pages will be
canceled.
This setting will prevent the next user from printing the unnecessary
pages from the previous user's print job.
D146/D147/D148/D149/D150
Queue is
not locked
after SSEJ
Does not
allow
SSEJ with
ECD
Job does
not cancel
2-806
0 1
- -
- -
- -
- -
- -
Queue
locked after
SSEJ
Allows SSEJ
with ECD
Job cancels
System Maintenance Section