Ricoh D146 Service Manual page 1564

Shift Tray Lower Limit Sensor
4
050
Gets information of specified sensor. Displays signal level of sensor as it is.
Shift Tray Lower Limit Sensor
5
051
Gets information of specified sensor. Displays signal level of sensor as it is.
Punch Chad Full Sensor
052
Gets information of specified sensor. Displays signal level of sensor as it is.
Punch Set Detection
053
Gets connection status of punch unit.
Shift Jogger Set Detection
054
Gets connection status of setting jogger unit.
* Not use: currently, VOLGA-B does not have setting jogger in system
configuration.
Booklet Stapler Set Detection
055
Gets connection status of saddle stitch unit.
Front Door SW
056
Gets information of specified switch. Displays signal level of switch as it is.
Dynamic Roller Open/Close
Guide Plate Sensor
057
Gets information of specified switch. Displays signal level of switch as it is.
Tray Upper Limit SW
058
Gets information of specified switch. Displays signal level of switch as it is.
System Maintenance Section
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
[0 or 1 / 0 / 1/step]
ENG 0: connected
1: not connected
[0 or 1 / 0 / 1/step]
ENG 0: connected
1: not connected
[0 or 1 / 0 / 1/step]
ENG 0: not connected
1: connected
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
3-25 D146/D147/D148/D149/D150
Input Check Table