Ricoh D146 Service Manual page 1534

1011 [Org Count Display]
-
001
This SP codes switches the original count display on/off.
1012 [User Info Release]
-
This SP code sets the machine to release or not release the following items at
job end.
001
§
Destination (E-mail/Folder/CS)
§
Sender name
§
Mail Text
§
Subject line
§
File name
1013 [Multi Media Function]
-
002
This SP code enables/disables the multi-media function option (USB 2.0/SD
Slot) mounted on the front of the machine. Operators can scan documents to
either an SD card or a USB memory device inserted into this unit. This SP
must be enabled (set to "1") in order for the device to function.
1014 [-]
-
001
Enables / Disables to input password for Scan To Folder.
System Maintenance Section
[0 or 1 / 0 / 1 / step]
*CTL 0: OFF (no display)
1: ON (count displays)
[0 or 1 / 1 / 1 / step]
*CTL 1: Release
0: Do not release
[0 or 1 / 1 / 1 / step]
*CTL 0: Disable
1: Enable
[0 or 1 / 0 / 1 / step]
*CTL 0: Disable
1: Enable
2-815
Scanner SP Mode
D146/D147/D148/D149/D150