Print Info; Executing Print Info; Info Page; Print Settings - Epson AcuLaser C2900N Service Manual

Chapter 2 Operation of Diagnostic

4.3 Print Info

Prints out the detailed printer settings and configuration information.

4.3.1 Executing Print Info

1) Power off the printer.
2) Power on the printer while pressing " " and " " keys.
3) Release the fingers from these keys when the "CE Mode" and "Password" is displayed.
4) Press " " key twice and press "OK" key.
5) The "CE Mode" and "ESS Diag" are displayed. (Entered the Diag. mode.)
6) Press " " key to select "Print Info", and then press "OK" key.
7) Press " " or " " key to select an item from "Print Info".
8) Press "OK" key twice to execute the process.
- To exit the test or to return to one step higher menu, press the "STOP" key.
- A test is not performed when an obstacle is in IOT.

4.3.2 Info Page

The version of software of IOT and the printer configuration can be confirmed by executing this test.

4.3.3 Print Settings

The service tag, printing count value and error count value can be confirmed by executing this test.
Epson AcuLaser C2900N 2 - 34
Revision B
Confidential