Chapter 2 Operation of Diagnostic
4.7 Complete
Completes the Diag operation and reloads the data.
4.7.1 Executing Complete
1)
Power off the printer.
2)
Power on the printer while pressing " " and " " keys.
3)
Release the fingers from these keys when the "CE Mode" and "Password" is displayed.
4)
Press " " key twice and press "OK" key.
5)
The "CE Mode" and "ESS Diag" are displayed. (Entered the Diag. mode.)
6)
Press " " key to select "Complete", and then press "OK" key.
7)
Press "OK" key twice to execute the process.
To exit the print or to return to one step higher menu, press the "STOP" key.
Epson AcuLaser C2900N
2 - 48
Revision B
Confidential