Epson AcuLaser C2900N Service Manual page 330

Chapter 3 Removal and Replacement Procedures Revision B
[Replacement]
1) Attach the SPRING ACT REGI to the
ACTUATOR REGI IN.
Note: When carrying out the work
SPRING ACT REGI
described next procedure, ensure that
the SPRING ACT REGI is hung to
ACTUATOR REGI IN and the CHUTE UP
correctly.
2) Insert the right shaft of the ACTUATOR
REGI IN into the hole of the CHUTE UP,
hang the SPRING ACT REGI to the
CUHTE UP.
3 - 76 Confidential
Epson AcuLaser C2900N