Chapter 3 Removal and Replacement Procedures
RRP4.6 DRUM CARTRIDGE (PL4.1.21)
[Removal]
Note: Remove the CASSETTE ASSY 250 before working.
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
3) Open the TRANSFER ASSY (PL6.1.7).
4) Put the paper on the TRANSFER ASSY
to protect the belt.
Note: When carrying out the work this
procedure, take care not to cover the
left and right of the belt guards with the
paper.
5) Rotate the four stoppers of the DRUM
CARTRIDGE (PL4.1.21) to the
counterclockwise direction, to release the
lock.
6) Remove the DRUM CARTRIDGE
toward you by pulling it by the left and right
handles.
7) Lift up the DRUM CARTRIDGE from the
printer.
Epson AcuLaser C2900N
[NOTE]
5)
5)
HANDLE
7)
3 - 132
[NOTE]
BELT GUARD
4)
PAPER
6)
Confidential
Revision B
5)
5)