Chapter 3 Removal and Replacement Procedures
Revision B
[Replacement]
Note: When carrying out the work
described next procedure, route the
harness of the TRANSFER ASSY
through the groove of the UPPER UNIT.
1) Mate the two holes of the UPPER UNIT
with the bosses of the FEEDER ASSY MG
SFP and attach it.
2) Secure the BRACKET MCU L and the
left side of the printer frame with the two
screws (silver, tap, 8mm).
3 - 105
Confidential
Epson AcuLaser C2900N