Epson AcuLaser C2900N Service Manual page 154

Chapter 1 Troubleshooting
FIP-1.P3 Part or the entire output is black.
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the solid black.
1 Checked by [Test Print] - [Test Pattern 600] in diagnostic.
Is the image printed correctly?
Checking the printer driver setting.
2 Is the [Output Color] option under the [Graphics] tab set to
"Color (Auto)"?
Checking the Toner Type.
3
Is the Toner for C2900 seated?
Checking after resetting the DRUM CARTRIDGE.
4 Reseat the DRUM CARTRIDGE.
Is the image printed correctly?
Checking after resetting the PWBA HVPS.
5 Reseat the PWBA HVPS.
Is the image printed correctly?
Checking after replacing the DRUM CARTRIDGE.
6 Replace the DRUM CARTRIDGE. (Refer to RRP4.6.)
Is the image printed correctly?
Epson AcuLaser C2900N
Check
1 - 141
ESS and possible causative parts
- PWBA HVPS (PL4.1.19)
- DRUM CARTRIDGE (PL4.1.21)
Yes
Printing data is
incorrect, then
check the printing
data which the
problem
generated.
Go to step 3.
Go to step 4.
End of work.
End of work.
End of work.
Revision B
Remedy
No
Go to step 2.
Set the option to
"Color (Auto)".
Replace the toner
with the Genuine
Toner.
Go to step 5.
Go to step 6.
Replace the
PWBA HVPS.
(Refer to RRP4.5.)
Confidential