Executing Parameter (Life Counter) - Epson AcuLaser C2900N Service Manual

Chapter 2 Operation of Diagnostic

4.6.2 Executing Parameter (Life Counter)

1) Turn off the power.
2) Turn on the power while holding down " " and " " keys.
3) Release the fingers from these keys when the "CE Mode" and "Password" is displayed.
4) Press " " key twice and press "OK" key.
5) The "CE Mode" and "ESS Diag" are displayed. (Entered the Diag. mode.)
6) Press " " to select "Parameter", and then press "OK" key.
7) Press " " and " " key to select the Life Counter item, and then press "OK" key .
8) Press "OK" key to execute the setting.
The current life counter value is displayed.
To exit the test or to returning to one step higher menu, press "STOP" key.
- Reference Counter Values
These counter values are reference only. Do not use as the official value.
Epson AcuLaser C2900N
Counter Name
Life Y Toner
Life M Toner
Life C Toner
Life K Toner
Life Fuser Unit
Life Printer
Life DTB (Transfer Belt)
Life Y Waste Toner
Life M Waste Toner
Life C Waste Toner
Life K Waste Toner
Life Y Drum
Life M Drum
Life C Drum
Life K Drum
Life Drum Xero
Life Drum Deve K
Life SSI Sheet
Life Tray 1 Sheet
Life Tray 2 Sheet
Life Duplex Sheet
Life Custom In
Life Custom Out
Value of life warning
Std.:1000/High:2500
Std.:1000/High:2500
Std.:1000/High:2500
Std.:1000/High:3000
50000
100000
-
-
-
-
-
24000
24000
24000
24000
-
-
-
-
-
-
-
-
2 - 46
Revision B
Confidential