Epson AcuLaser C2900N Service Manual page 411

Hide thumbs Also See for AcuLaser C2900N:

Table of Contents

Chapter 3 Removal and Replacement Procedures

RRP6.2 STOPPER PIVOT (PL6.1.3), PIVOT TRANS L (PL6.1.4), GEAR T4 (PL6.1.5),

SHAFT ASSY PIVOT (PL6.1.6) , COVER HARNESS(PL6.1.8)

1) Remove the CASSETTE ASSY 250. (RRP2.1)

2) Open the COVER ASSY FRONT MG (PL1.2.1).

Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.

3) Remove the DRUM CARTRIDGE. (RRP4.6)

Note: The FUSING part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the FUSER UNIT. (Removal 6.1)

5) Remove the COVER ASSY TOP. (RRP1.1)

6) Remove the COVER ASSY WINDOW TNR. (RRP1.6)

7) Remove the COVER SIDE R. (RRP1.5)

8) Remove the COVER SIDE L. (RRP1.7)

9) Release the harness of the CLUTCH

ASSY DRV (PL3.1.1) from the hook of the

DRIVE ASSY PH (PL7.1.4).

10) Remove the E-ring that fixes the

CLUTCH ASSY DRV to the shaft, using a

miniature screwdriver, remove the

CLUTCH ASSY DRV.

Confidential

Epson AcuLaser C2900N

Show Quick Links

Chapters

Table of Contents