Check Installation Status - Epson AcuLaser C2900N Service Manual

Chapter 1 Troubleshooting

1.2 Check Installation Status

Be sure to check the following items before starting the troubleshooting procedures
1) The power supply voltage is within the specifications (measure the voltage at the wall outlet).
2) Power cord is free from breakage, short-circuit, disconnected wire, or incorrect connection in the
power cord.
3) The printer is properly grounded.
4) The printer is not installed at a place subjected to high/low temperature, humidity, and sudden tem-
perature changes.
5) The printer is not installed at or near water facilities, humidifier, heating appliance, fire, dust, or in
airflow from air conditioner.
6) The printer is not installed in a place subjected to volatile or inflammable gas.
7) The printer is not installed under direct sunlight.
8) The printer is installed in a well-ventilated place.
9) The printer is installed on a firm and stable surface.
10) The paper meets the specifications (standard paper is recommended).
11) The printer is handled properly.
12) The high frequency service items are replaced at the recommended print count intervals.
Epson AcuLaser C2900N 1 - 2
Revision B
Confidential