Chapter 3 Removal and Replacement Procedures
Revision B
RRP3.5 ROLL ASSY FEED (PL3.2.4)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
3) Remove the DRUM CARTRIDGE. (RRP4.6)
4) Release the hook of the ROLL CORE
MSI (PL3.2.3) on the left of the ROLL
ASSY FEED (PL 3.2.4), and move the
ROLL CORE MSI to left until it stops.
5) Release the groove on the ROLL ASSY
FEED from the vertical pin mounted on the
SHAFT ASSY FEED (PL3.2.2) by sliding
the ROLL ASSY FEED to the left.
6) Close the COVER ASSY FRONT MG.
3 - 63
Confidential
Epson AcuLaser C2900N