Installation Set; Executing Installation Set - Epson AcuLaser C2900N Service Manual

Chapter 2 Operation of Diagnostic

4.4 Installation Set

Displays values on the counters of the printer and sets.

4.4.1 Executing Installation Set

1) Turn off the power.
2) Turn on the power while holding down " " and " " keys.
3) Release the fingers from these keys when the "CE Mode" and "Password" is displayed.
4) Press " " key twice and press "OK" key.
5) The "CE Mode" and "ESS Diag" are displayed. (Entered the Diag. mode.)
6) Press " " to select "Installation Set", and then press "OK" key.
7) Press " " and " " key to select the item.
8) Press "OK" key twice to execute the setting.
To exit the Print or to return to one step higher menu, press the "STOP" key.
Menu
Serial No.
Tone Correction
HexDup
Pixel Counter
Configuration
Print Counter
CopyCounter
MtoB
CopyCounter
BtoM
Clear All NVM
Clear JobHistory
Clear AuditronPV
Epson AcuLaser C2900N
Serial number of the printer.
Specifies whether or not tone correction is performed.
Allows you to print the received print data in hexadecimal
notation.
Used to analyze the received data in case of a printing error.
Setting Hex Dump to ON allows you to print the received
data via [Info Page] under [Print info].
Pixel count values of colors Y/M/C/K.
The use of "Configuration" is prohibited since it is a tool for
design development.
Displays the respective counter values in the master NVM
and backup NVM.
Full Color: Number of color print.
B/W: Number of the black and white print.
Print Total: Total of Full Color, Color 1, Color 2 and B/W.
Service
Full Color Error: Number of error in color print.
B/W Error: Number of error in black and white
print.
Copies the counter value in the master NVM of the ESS
PWBA to the backup NVM of the ESS PWBA.
Copies the counter value in the backup NVM of the ESS
PWBA to the master NVM of the ESS PWBA.
Initializes all value of NVM.
Initializes Job history.
Initializes print volume (PV) or information of Print Auditron.
When Print Auditron is enabled, initializes information of
Print Auditron.
Contents
2 - 35
Revision B
Setting value
Read only
On: Enable
Off: Disable
On: Enable
Off: Disable
Read only
-
Read only
-
-
-
-
-
Confidential