Epson AcuLaser C2900N Service Manual page 415

Chapter 3 Removal and Replacement Procedures Revision B
3) Attach the GEAR T4 to the printer, align
the holes of the GEAR T4, the printer
frame, and the TRANSFER ASSY, and
then insert the PIVOT TRANS L.
Note: When carrying out the work
described next procedure, ensure that
the flat face of the PIVOT TRANS L is
oriented to the direction shown in the
right.
4) Mate the tab of the STOPPER PIVOT
with the notch of the DRIVE ASSY MAIN,
attach the STOPPER PIVOT to the PIVOT
TRANS L.
3 - 161 Confidential
Epson AcuLaser C2900N