Chapter 3 Removal and Replacement Procedures
Revision B
[Replacement]
1) Engage the connector (P/J232) of the
SENSOR PHOTO: REGI.
2) Replace the SENSOR PHOTO: REGI to
the FEEDER ASSY MG SFP V by mating
the three hooks of the SENSOR PHOTO:
REGI.
Note: When carrying out the work this
procedure, it is easier to push the
ACTUATOR REGI IN (PL3.2.11) to
downward.
3) Close the ACTUATOR REGI OUT by
inserting the boss of the ACTUATOR REGI
OUT into the SPRING REGI OUT.
3 - 80
Confidential
Epson AcuLaser C2900N