Lead-Edge Registration - Epson AcuLaser C2900N Service Manual

Chapter 6 Principles of Operation

2.5.1 Lead-edge Registration

When a sheet is fed from the SSI, paper tray or Duplex to the toner transfer position, the registration of
the sheet may not be correctly maintained due to such troubles as misalignment of lead edges in the
paper tray. To avoid this trouble, the lead edge position needs to be aligned at the registration section
before the sheet is fed to the toner transfer position.
By thrusting the edge of the sheet coming out of the SSI or paper tray against the REGI ROLL (ROLL
REGI METAL: PL 3.2.10 / ROLL ASSY REGI: PL 3.2.9) that is locked, the lead edge of the sheet is reg-
istered.
Epson AcuLaser C2900N
REGI ROLL
Skewed Paper
ROLL REGI METAL
ROLL ASSY REGI
6 - 21
Revision B
MiS06010KA
Confidential