Epson AcuLaser C2900N Service Manual page 300

Chapter 3 Removal and Replacement Procedures Revision B
RRP3. PAPER FEEDER
RRP3.1 CLUTCH ASSY DRV (PL3.1.1), BEARING REGI (PL3.1.2)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
3) Open the TRANSFER ASSY (PL6.1.7).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
4) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
5) Remove the FUSER UNIT. (RRP6.1)
6) Remove the COVER SIDE L. (RRP1.7)
7) Release the harness of the CLUTCH
ASSY DRV (PL3.1.1) from the hook of the
DRIVE ASSY PH (PL7.1.4).
Note: When carrying out the work described below, leave the relay connector on the printer
harness side.
8) Disengage the connector (P/J262) of
the CLUTCH ASSY DRV.
3 - 46 Confidential
Epson AcuLaser C2900N