Chapter 3 Removal and Replacement Procedures
Revision B
7) Turn off the power.
8) Turn on the power while pressing the "▲" key and"▼" key on the control panel.
9) Press the "▼" key several times until "Parameter" is displayed. Press the [OK] key once.
10) Press the "▼" key several times until "Life Fuser Sheet" is displayed. Press the [OK] key once.
11) Press the "▼" key several times until "Initializing" is displayed. Press the [OK] key once.
12) Press the [OK] key once, and Initializing the Life Counter of the FUSER UNIT is performed.
13) Turn off the power to exit.
3 - 156
Confidential
Epson AcuLaser C2900N