Epson AcuLaser C2900N Service Manual page 306

Chapter 3 Removal and Replacement Procedures Revision B
RRP3.3 SOLENOID FEED MSI (PL3.1.11)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
3) Open the TRANSFER ASSY (PL6.1.7).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
4) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
5) Remove the FUSER UNIT. (RRP6.1)
6) Remove the COVER CST. (RRP1.7)
7) Remove the COVER ASSY WINDOW TNR. (RRP1.6)
8) Remove the COVER SIDE R. (RRP1.5)
9) Remove the COVER SIDE L. (RRP1.7)
10) Remove the COVER REAR. (RRP1.3)
11) Remove the CLUTCH ASSY DRV and BEARING REGI. (RRP3.1)
12) Remove the DRIVE ASSY PH. (RRP7.3)
13) Release the hook of the ROLL CORE
MSI (PL3.2.3) on the left of the ROLL
ASSY FEED (PL 3.2.4), and move the
ROLL CORE MSI to left until it stops.
3 - 52 Confidential
Epson AcuLaser C2900N