Epson AcuLaser C2900N Service Manual page 184

Chapter 1 Troubleshooting
FIP-1.P21 Unfusing
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the using paper
1
Does the using paper meet the specifications?
2 Is the image printed correctly?
Checking after resetting the fuser unit.
Warning: Start the operation after the fuser unit has
3 cooled down.
Reseat the fuser unit.
Is the image printed correctly?
Epson AcuLaser C2900N
Possible causative parts
- FUSER UNIT (PL6.1.1)
Mnt01118KA
Check
Go to step 3.
End of work.
End of work.
1 - 171
Revision B
Remedy
Yes No
Use the paper that
meets the
specifications,
then go to step 2.
Go to step 3.
Warning: Start the
operation after the
fuser unit has
cooled down.
Replace the fuser
unit. (Refer to
RRP6.1.) After
replacement, be
sure to clear the
life counter value.
Confidential