Chapter 3 Removal and Replacement Procedures
Revision B
RRP7.2 DRIVE ASSY MAIN (PL7.1.2)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
3) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER UNIT. (RRP6.1)
5) Remove the COVER ASSY TOP. (RRP1.1)
6) Remove the COVER ASSY WINDOW TNR. (RRP1.6)
7) Remove the COVER SIDE R. (RRP1.5)
8) Remove the COVER SIDE L. (RRP1.7)
9) Remove the COVER REAR. (RRP1.3)
10) Remove the CLUTCH ASSY DRV and BEARING REGI. (RRP3.1)
11) Remove the GEAR P2, DRIVE ASSY PH. (RRP7.3)
12) Rotate the STOPPER PIVOT
(PL6.1.3), mate the tabs of the STOPPER
PIVOT with the notches of the DRIVE
ASSY MAIN (PL7.1.2).
3 - 171
Confidential
Epson AcuLaser C2900N