Chapter 3 Removal and Replacement Procedures
Revision B
RRP8.5 PWBA LVPS (PL8.2.1)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
3) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER UNIT. (RRP6.1)
5) Remove the COVER ASSY TOP. (RRP1.1)
6) Disengage all the connectors of the
PWBA LVPS (PL8.2.1).
7) Remove the six screws (silver, 6mm)
that fix the PWBA LVPS to the printer.
3 - 201
Confidential
Epson AcuLaser C2900N