Chapter 3 Removal and Replacement Procedures
Revision B
3) Secure the rear side DISPENSER
ASSY with the one screw (silver, M4,
6mm) and BRACKET MCU L with the one
screw (silver, tap, 8mm).
4) Route the HARNESS ASSY B and the
HARN ASSY OOPTION to the
DISPENSER ASSY. Secure the harnesses
using the hooks on the DISPENSER
ASSY.
5) Open the HOLDER TCRU (K), (C), (M)
and (Y), secure the right side of the printer
frame with the one screw (silver, tap,
8mm).
3 - 106
Confidential
Epson AcuLaser C2900N