Epson AcuLaser C2900N Service Manual page 333

Chapter 3 Removal and Replacement Procedures Revision B
19) Release the ACTUATOR REGI OUT
from the hook on the CHUTE UP
(PL3.2.26), open the ACTUATOR REGI
OUT.
20) Release the three hooks that fix the
SENSOR PHOTO: REGI (PL3.2.13) to the
FEEDER ASSY MG SFP (PL3.1.98), and
remove the SENSOR PHOTO: REGI.
Note: When carrying out the work this
procedure, it is easier to push the
ACTUATOR.
21) Disengage the connector (P/J232) of
the SENSOR PHOTO: REGI.
3 - 79 Confidential
Epson AcuLaser C2900N