Chapter 3 Removal and Replacement Procedures
Revision B
11) Lift the rear part of the BRACKET SNS
up to release the two holes of the
BRACKET SNS from the bosses of the
printer.
12) Shift the BRACKET SNS to frontward,
release the five tabs of the BRACKET
SNS from the printer. Remove the
BRACKET SNS.
13) Release the left shaft of the
ACTUATOR SSI (PL3.2.14) from the hook
of the CHUTE UP (PL3.2.26).
3 - 91
Confidential
Epson AcuLaser C2900N