Epson AcuLaser C2900N Service Manual page 47

Chapter 1 Troubleshooting
FIP-1.8 016-718: Memory Over flow
Step
Possible causative parts:
MEMORY CARD (OPTION) (PL8.1.15)
Checking for memory expansion.
1 Is additional memory installed?
Is the additional memory installed properly?
Checking after setting the Print Mode to "Standard" via the
printer driver Set the Print Mode of the printer driver to
2
"Standard".
Does the error persist during printing?
Deleting the data by executing Clear Storage. Execute
3 "Clear Storage"under [Maintenance] in the Control Panel.
Does the error persist during printing?
Epson AcuLaser C2900N
Check
1 - 34
Remedy
Yes
Install additional
Go to step 2. memory. Or, re-
install it properly.
Go to step 3. End of work.
The current
printing job
process cannot be
continued End of work.
because the
memory capacity
is exceeded.
Revision B
No
Confidential