Epson AcuLaser C2900N Service Manual page 283

Chapter 3 Removal and Replacement Procedures Revision B
RRP1.10 LATCH ASSY FRONT (PL1.2.5), SPRING LATCH FRONT (PL1.2.10),
BUTTON LATCH FRONT (PL1.2.11)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
3) Remove the FEEDER ASSY DUP SFP STD. (RRP9.1) [Optional duplex only]
4) Open the TRANSFER ASSY (PL6.1.7).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
5) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
6) Remove the FUSER UNIT. (RRP6.1)
7) Remove the COVER ASSY WINDOW TNR. (RRP1.6)
8) Remove the COVER SIDE R. (RRP1.5)
9) Remove the COVER SIDE L. (RRP1.7)
10) Remove the COVER ASSY FRONT MG. (RRP1.8)
11) Remove the four screws (silver, tap,
8mm) that fix the HOLDER ASSY FRONT
R (PL1.2.28) to the COVER ASSY FRONT
MG.
12) Remove the HOLDER ASSY FRONT
R from the COVER ASSY FRONT MG.
3 - 29 Confidential
Epson AcuLaser C2900N