Chapter 3 Removal and Replacement Procedures
Revision B
14) Release the groove on the ROLL
ASSY FEED from the vertical pin mounted
on the SHAFT ASSY FEED (PL3.2.2) by
sliding the ROLL ASSY FEED to the left.
15) Close the COVER ASSY FRONT MG.
16) Remove the ROLL ASSY FEED from
the SHAFT ASSY FEED by rotating the
ROLL ASSY FEED 180 degrees.
17) Open the COVER ASSY FRONT MG.
3 - 53
Confidential
Epson AcuLaser C2900N