Epson AcuLaser C2900N Service Manual page 458

Chapter 3 Removal and Replacement Procedures Revision B
RRP8.6 HARN ASSY INTERLOCK (PL8.2.5)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
3) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER UNIT. (RRP6.1)
5) Remove the COVER ASSY TOP. (RRP1.1)
6) Remove the COVER SIDE L. (RRP1.7)
Note: Release only the HARN ASSY
INTERLOCK from the GUIDE HARNESS
FSR to prevent the faulty wiring when it
assembles it.
7) Disengage the connector (P/J44) of the
HARN ASSY INTERLOCK (PL8.2.5) on
the PWBA LVPS (PL8.2.1), release the
harness of the HARN ASSY INTERLOCK
from the GUIDE HARNESS FSR
(PL8.2.2).
8) Release the clamps that fix the harness
of the HARN ASSY INTERLOCK, remove
the harness.
3 - 204 Confidential
Epson AcuLaser C2900N