Epson AcuLaser C2900N Service Manual page 374

Chapter 3 Removal and Replacement Procedures Revision B
RRP4.2 SPRING PHD (PL4.1.4), LEVER PHD (PL4.1.5), BLOCK STOPPER PHD D
(PL4.1.6)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
3) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER UNIT. (RRP6.1)
5) Remove the COVER ASSY TOP. (RRP1.1)
6) Remove the COVER ASSY WINDOW TNR. (RRP1.6)
7) Remove the COVER SIDE R. (RRP1.5)
8) Remove the COVER SIDE L. (RRP1.7)
9) Remove the COVER REAR. (RRP1.3)
10) Remove the CLUTCH ASSY DRV and BEARING REGI. (RRP3.1)
11) Remove the GEAR P2, DRIVE ASSY PH. (RRP7.3)
12) Remove the DRIVE ASSY MAIN. (RRP7.2)
13) Release the hook of the BLOCK
STOPPER PHD D (PL4.1.6), using a
miniature screwdriver.
3 - 120 Confidential
Epson AcuLaser C2900N