Chapter 3 Removal and Replacement Procedures
Revision B
RRP8.7 SENSOR HUM (PL8.2.7)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
3) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER UNIT. (RRP6.1)
5) Remove the COVER ASSY TOP. (RRP1.1)
6) Remove the COVER SIDE L. (RRP1.7)
7) Remove the one screw (silver, tap,
8mm) that fixes the SENSOR HUM
(PL8.2.7) to the printer, remove the
SENSOR HUM.
8) Disengage the connector (P/J201) of
the SENSOR HUM.
3 - 207
Confidential
Epson AcuLaser C2900N