Chapter 3 Removal and Replacement Procedures
Revision B
4) Attach the HOLDER ASSY FRONT R to
the COVER ASSY FRONT MG.
Note: When carrying out the work this
procedure, take care not to damage the
harness by pinching it between the
HOLDER ASSY FRONT R and the
COVER ASSY FRONT MG.
5) Secure the HOLDER ASSY FRONT R
to the COVER ASSY FRONT MG with the
three screws (silver, tap, 8mm).
3 - 39
Confidential
Epson AcuLaser C2900N