Chapter 3 Removal and Replacement Procedures
Revision B
RRP4.4 LED ASSY ERASE (PL4.1.8)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
3) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER UNIT. (RRP6.1)
5) Remove the COVER ASSY TOP. (RRP1.1)
6) Remove the COVER ASSY WINDOW TNR. (RRP1.6)
7) Remove the COVER SIDE R. (RRP1.5)
8) Remove the two screws (silver, tap,
8mm) that fix the LED ASSY ERASE
(PL4.1.8) to the printer.
9) Remove the LED ASSY ERASE from
the printer.
3 - 126
Confidential
Epson AcuLaser C2900N