Chapter 3 Removal and Replacement Procedures
Revision B
12) Swing the PLATE ESS to upward
slightly, to release the upper tab of the
PLATE ESS from the slit of the SHIELD
ASSY ESS (PL8.1.3) after releasing the
lower tab of the PLATE ESS from the slit of
the SHIELD ASSY ESS. Remove the
PLATE ESS from the printer.
13) Remove the eleven screws (silver,
6mm) that fix the SHIELD ASSY ESS to
the printer.
3 - 191
Confidential
Epson AcuLaser C2900N