Chapter 1 Troubleshooting
FIP-1.P22 Label Stuck
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking for foreign materials around the paper transfer
path.
1
Are there any foreign materials such as precut adhesive
labels in the paper transfer path?
Epson AcuLaser C2900N
.Possible causative parts
- FUSER UNIT (PL6.1.1)
Check
1 - 172
Remedy
Yes
Warning: Start the
operation after the
fuser unit has
cooled down.
Remove the
Replace the fuser
foreign materials.
unit. (Refer to
RRP6.1.) After
replacement, be
sure to clear the
life counter value.
Revision B
No
Confidential