Chapter 3 Removal and Replacement Procedures
Revision B
[Replacement]
1) Route the connector (J48) of the
SWITCH ASSY INLET MG SFP through
the hole of the COVER INLET.
2) Route the harness and SWITCH
POWER of the SWITCH ASSY INLET MG
SFP through the hole of the COVER
INLET.
3) Attach the AC INLET of the SWITCH
ASSY INLET MG SFP to the COVER
INLET, and secure it with the hooks.
3 - 213
Confidential
Epson AcuLaser C2900N