Chapter 1 Troubleshooting
FIP-1.P10 Light-Induced Fatigue
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking after "Drum Refresh Mode".
Execute the "Drum Refresh Mode".
1
- To execute the "Drum Refresh Mode", click [Drum Refresh
Mode] in [Refresh Mode] on the diagnosis tab of Tool Box.
Is the image printed correctly?
Checking after replacing the DRUM CARTRIDGE.
2
Replace the DRUM CARTRIDGE. (Refer to RRP4.6.)
Does the error still occur when printing?
Epson AcuLaser C2900N
Possible causative parts
- DRUM CARTRIDGE (PL4.1.21)
Check
1 - 155
Remedy
Yes
End of work.
Go to step 2.
Replace the
End of work.
Printer.
Revision B
No
Confidential