Epson AcuLaser C2900N Service Manual page 377

Chapter 3 Removal and Replacement Procedures Revision B
RRP4.3 SPRING PHD (PL4.1.4), LEVER PHD (PL4.1.5), BLOCK STOPPER PHD AD
(PL4.1.7)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
3) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER UNIT. (RRP6.1)
5) Remove the COVER ASSY TOP. (RRP1.1)
6) Remove the COVER ASSY WINDOW TNR. (RRP1.6)
7) Remove the COVER SIDE R. (RRP1.5)
8) Remove the LED ASSY ERASE. (RRP4.4)
9) Release the hook of the BLOCK
STOPPER PHD AD (PL4.1.7), using a
miniature screwdriver.
10) Remove the BLOCK STOPPER PHD
AD from the printer.
3 - 123 Confidential
Epson AcuLaser C2900N