Chapter 3 Removal and Replacement Procedures
Revision B
[Replacement]
Note: When carrying out the work described next procedure, take care to check the orientation
of the FAN. (Attach the FAN so that its labeled surface faces front.)
1) Secure the FAN to the DUCT FAN with
the four hooks.
2) Route the harness of the FAN through
the hooks of the DUCT FAN, engage the
connector (P/J503) of the FAN to the
PWBA LVPS.
3 - 183
Confidential
Epson AcuLaser C2900N