Epson AcuLaser C2900N Service Manual page 230

Chapter 2 Operation of Diagnostic
Motor/Clutch/Solenoid Name
(Diag. Code)
Exit Motor
(DO-d/e/f/10)
Duplex Motor
(DO-12/13/14/15)
Epson AcuLaser C2900N
1) Power on the printer, and enter the Diag Mode.
2) Execute DO-d.
3) Check that the Exit Roll rotates.
Exit Roll
4) Press the "STOP" key to stop the test.
NOTE: This procedure is for the technical staff.
When performing operation for five minutes or longer with the front
cover open, remove the drum cartridge, and cover the drum to avoid
exposure to light.
1) Power on the printer, and enter the Diag Mode.
2) Open the Front Cover and CHUTE DUP IN.
3) Cheat the Safety Interlock System.
4) Execute DO-12.
5) Check that the Duplex Roller rotates.
CHUTE DUP IN
6) Press the "STOP" key to stop the test.
7) Remove the cheater.
8) Close the CHUTE DUP IN and Front Cover.
2 - 26
Check procedure
Duplex Roll
Revision B
MiS2014SA
MiS02015SA
Confidential